254 lines
10 KiB
ReStructuredText
254 lines
10 KiB
ReStructuredText
Frequently asked questions
|
||
##########################
|
||
|
||
"ImportError: dynamic module does not define init function"
|
||
===========================================================
|
||
|
||
1. Make sure that the name specified in ``pybind::module`` and
|
||
``PYBIND11_PLUGIN`` is consistent and identical to the filename of the
|
||
extension library. The latter should not contain any extra prefixes (e.g.
|
||
``test.so`` instead of ``libtest.so``).
|
||
|
||
2. If the above did not fix your issue, then you are likely using an
|
||
incompatible version of Python (for instance, the extension library was
|
||
compiled against Python 2, while the interpreter is running on top of some
|
||
version of Python 3, or vice versa)
|
||
|
||
"Symbol not found: ``__Py_ZeroStruct`` / ``_PyInstanceMethod_Type``"
|
||
========================================================================
|
||
|
||
See item 2 of the first answer.
|
||
|
||
"SystemError: dynamic module not initialized properly"
|
||
======================================================
|
||
|
||
See item 2 of the first answer.
|
||
|
||
The Python interpreter immediately crashes when importing my module
|
||
===================================================================
|
||
|
||
See item 2 of the first answer.
|
||
|
||
CMake doesn't detect the right Python version
|
||
=============================================
|
||
|
||
The CMake-based build system will try to automatically detect the installed
|
||
version of Python and link against that. When this fails, or when there are
|
||
multiple versions of Python and it finds the wrong one, delete
|
||
``CMakeCache.txt`` and then invoke CMake as follows:
|
||
|
||
.. code-block:: bash
|
||
|
||
cmake -DPYTHON_EXECUTABLE:FILEPATH=<path-to-python-executable> .
|
||
|
||
Limitations involving reference arguments
|
||
=========================================
|
||
|
||
In C++, it's fairly common to pass arguments using mutable references or
|
||
mutable pointers, which allows both read and write access to the value
|
||
supplied by the caller. This is sometimes done for efficiency reasons, or to
|
||
realize functions that have multiple return values. Here are two very basic
|
||
examples:
|
||
|
||
.. code-block:: cpp
|
||
|
||
void increment(int &i) { i++; }
|
||
void increment_ptr(int *i) { (*i)++; }
|
||
|
||
In Python, all arguments are passed by reference, so there is no general
|
||
issue in binding such code from Python.
|
||
|
||
However, certain basic Python types (like ``str``, ``int``, ``bool``,
|
||
``float``, etc.) are **immutable**. This means that the following attempt
|
||
to port the function to Python doesn't have the same effect on the value
|
||
provided by the caller -- in fact, it does nothing at all.
|
||
|
||
.. code-block:: python
|
||
|
||
def increment(i):
|
||
i += 1 # nope..
|
||
|
||
pybind11 is also affected by such language-level conventions, which means that
|
||
binding ``increment`` or ``increment_ptr`` will also create Python functions
|
||
that don't modify their arguments.
|
||
|
||
Although inconvenient, one workaround is to encapsulate the immutable types in
|
||
a custom type that does allow modifications.
|
||
|
||
An other alternative involves binding a small wrapper lambda function that
|
||
returns a tuple with all output arguments (see the remainder of the
|
||
documentation for examples on binding lambda functions). An example:
|
||
|
||
.. code-block:: cpp
|
||
|
||
int foo(int &i) { i++; return 123; }
|
||
|
||
and the binding code
|
||
|
||
.. code-block:: cpp
|
||
|
||
m.def("foo", [](int i) { int rv = foo(i); return std::make_tuple(rv, i); });
|
||
|
||
|
||
How can I reduce the build time?
|
||
================================
|
||
|
||
It's good practice to split binding code over multiple files, as in the
|
||
following example:
|
||
|
||
:file:`example.cpp`:
|
||
|
||
.. code-block:: cpp
|
||
|
||
void init_ex1(py::module &);
|
||
void init_ex2(py::module &);
|
||
/* ... */
|
||
|
||
PYBIND11_PLUGIN(example) {
|
||
py::module m("example", "pybind example plugin");
|
||
|
||
init_ex1(m);
|
||
init_ex2(m);
|
||
/* ... */
|
||
|
||
return m.ptr();
|
||
}
|
||
|
||
:file:`ex1.cpp`:
|
||
|
||
.. code-block:: cpp
|
||
|
||
void init_ex1(py::module &m) {
|
||
m.def("add", [](int a, int b) { return a + b; });
|
||
}
|
||
|
||
:file:`ex2.cpp`:
|
||
|
||
.. code-block:: cpp
|
||
|
||
void init_ex1(py::module &m) {
|
||
m.def("sub", [](int a, int b) { return a - b; });
|
||
}
|
||
|
||
:command:`python`:
|
||
|
||
.. code-block:: pycon
|
||
|
||
>>> import example
|
||
>>> example.add(1, 2)
|
||
3
|
||
>>> example.sub(1, 1)
|
||
0
|
||
|
||
As shown above, the various ``init_ex`` functions should be contained in
|
||
separate files that can be compiled independently from one another, and then
|
||
linked together into the same final shared object. Following this approach
|
||
will:
|
||
|
||
1. reduce memory requirements per compilation unit.
|
||
|
||
2. enable parallel builds (if desired).
|
||
|
||
3. allow for faster incremental builds. For instance, when a single class
|
||
definition is changed, only a subset of the binding code will generally need
|
||
to be recompiled.
|
||
|
||
"recursive template instantiation exceeded maximum depth of 256"
|
||
================================================================
|
||
|
||
If you receive an error about excessive recursive template evaluation, try
|
||
specifying a larger value, e.g. ``-ftemplate-depth=1024`` on GCC/Clang. The
|
||
culprit is generally the generation of function signatures at compile time
|
||
using C++14 template metaprogramming.
|
||
|
||
|
||
.. _`faq:symhidden`:
|
||
|
||
How can I create smaller binaries?
|
||
==================================
|
||
|
||
To do its job, pybind11 extensively relies on a programming technique known as
|
||
*template metaprogramming*, which is a way of performing computation at compile
|
||
time using type information. Template metaprogamming usually instantiates code
|
||
involving significant numbers of deeply nested types that are either completely
|
||
removed or reduced to just a few instructions during the compiler's optimization
|
||
phase. However, due to the nested nature of these types, the resulting symbol
|
||
names in the compiled extension library can be extremely long. For instance,
|
||
the included test suite contains the following symbol:
|
||
|
||
.. only:: html
|
||
|
||
.. code-block:: none
|
||
|
||
__ZN8pybind1112cpp_functionC1Iv8Example2JRNSt3__16vectorINS3_12basic_stringIwNS3_11char_traitsIwEENS3_9allocatorIwEEEENS8_ISA_EEEEEJNS_4nameENS_7siblingENS_9is_methodEA28_cEEEMT0_FT_DpT1_EDpRKT2_
|
||
|
||
.. only:: not html
|
||
|
||
.. code-block:: cpp
|
||
|
||
__ZN8pybind1112cpp_functionC1Iv8Example2JRNSt3__16vectorINS3_12basic_stringIwNS3_11char_traitsIwEENS3_9allocatorIwEEEENS8_ISA_EEEEEJNS_4nameENS_7siblingENS_9is_methodEA28_cEEEMT0_FT_DpT1_EDpRKT2_
|
||
|
||
which is the mangled form of the following function type:
|
||
|
||
.. code-block:: cpp
|
||
|
||
pybind11::cpp_function::cpp_function<void, Example2, std::__1::vector<std::__1::basic_string<wchar_t, std::__1::char_traits<wchar_t>, std::__1::allocator<wchar_t> >, std::__1::allocator<std::__1::basic_string<wchar_t, std::__1::char_traits<wchar_t>, std::__1::allocator<wchar_t> > > >&, pybind11::name, pybind11::sibling, pybind11::is_method, char [28]>(void (Example2::*)(std::__1::vector<std::__1::basic_string<wchar_t, std::__1::char_traits<wchar_t>, std::__1::allocator<wchar_t> >, std::__1::allocator<std::__1::basic_string<wchar_t, std::__1::char_traits<wchar_t>, std::__1::allocator<wchar_t> > > >&), pybind11::name const&, pybind11::sibling const&, pybind11::is_method const&, char const (&) [28])
|
||
|
||
The memory needed to store just the mangled name of this function (196 bytes)
|
||
is larger than the actual piece of code (111 bytes) it represents! On the other
|
||
hand, it's silly to even give this function a name -- after all, it's just a
|
||
tiny cog in a bigger piece of machinery that is not exposed to the outside
|
||
world. So we'll generally only want to export symbols for those functions which
|
||
are actually called from the outside.
|
||
|
||
This can be achieved by specifying the parameter ``-fvisibility=hidden`` to GCC
|
||
and Clang, which sets the default symbol visibility to *hidden*. It's best to
|
||
do this only for release builds, since the symbol names can be helpful in
|
||
debugging sessions. On Visual Studio, symbols are already hidden by default, so
|
||
nothing needs to be done there. Needless to say, this has a tremendous impact
|
||
on the final binary size of the resulting extension library.
|
||
|
||
Another aspect that can require a fair bit of code are function signature
|
||
descriptions. pybind11 automatically generates human-readable function
|
||
signatures for docstrings, e.g.:
|
||
|
||
.. code-block:: none
|
||
|
||
| __init__(...)
|
||
| __init__(*args, **kwargs)
|
||
| Overloaded function.
|
||
|
|
||
| 1. __init__(example.Example1) -> NoneType
|
||
|
|
||
| Docstring for overload #1 goes here
|
||
|
|
||
| 2. __init__(example.Example1, int) -> NoneType
|
||
|
|
||
| Docstring for overload #2 goes here
|
||
|
|
||
| 3. __init__(example.Example1, example.Example1) -> NoneType
|
||
|
|
||
| Docstring for overload #3 goes here
|
||
|
||
|
||
In C++11 mode, these are generated at run time using string concatenation,
|
||
which can amount to 10-20% of the size of the resulting binary. If you can,
|
||
enable C++14 language features (using ``-std=c++14`` for GCC/Clang), in which
|
||
case signatures are efficiently pre-generated at compile time. Unfortunately,
|
||
Visual Studio's C++14 support (``constexpr``) is not good enough as of April
|
||
2016, so it always uses the more expensive run-time approach.
|
||
|
||
Working with ancient Visual Studio 2009 builds on Windows
|
||
=========================================================
|
||
|
||
The official Windows distributions of Python are compiled using truly
|
||
ancient versions of Visual Studio that lack good C++11 support. Some users
|
||
implicitly assume that it would be impossible to load a plugin built with
|
||
Visual Studio 2015 into a Python distribution that was compiled using Visual
|
||
Studio 2009. However, no such issue exists: it's perfectly legitimate to
|
||
interface DLLs that are built with different compilers and/or C libraries.
|
||
Common gotchas to watch out for involve not ``free()``-ing memory region
|
||
that that were ``malloc()``-ed in another shared library, using data
|
||
structures with incompatible ABIs, and so on. pybind11 is very careful not
|
||
to make these types of mistakes.
|