* setting the dataloader to sort by duration, then training until coherent speech emerges, so the model can start with the bulk of learning on small, insignificant utterances, then working its way up to larger ones.
* ~80% of the epoch from duratio ranges 1.0seconds to 0.8seconds is good enough, as most of the training from this part is just to train the model to speak at all.
* additional training using a shuffled dataloader, as the model will be fixated towards whatever duration range it was trained under.
* the remaining bulk is to try and have the model better adhere to the prompt as well.
* additional training for sampling per speaker, to better help diversify how well it can perform for a range of speakers, rather than just speaking itself
Training under `float16` should be fairly simple, but care is required to keep the loss scaling factor above 8K, and probably even 16K.
* At the very least for pre-trained models, low enough loss scales will irreparably fry the model, and no amount of training afterwards seems to "fix" it.
* The current DeepSpeed configuration should keep the loss scale capped to 32K; normal training does not seem to have the loss scale ever want to dip below this at least.
* Training under `bfloat16` does not have to worry about this as there's no need for loss scaling, but I feel the model performs better when trained under `float16`+AMP rather than `bfloat16` (with or without AMP).
When training from scratch, maybe 30% of the time spent training is getting coherent speech, with a loose following of the prompt. The remaining bulk of the work is getting the model to closely-er resemble the input prompt.
* an accuracy of at least 50% seems to be where coherent speech emerges.
* an accuracy of at least 68% is about where it's a good enough model that adheres to the prompt, but requires quite a lot of work to get there.
As far as typical hyperparameters go:
* as I'm using a batched dataloader, I don't have a uniform size amongst the batches, but I believe my average batch size is between 96 to 128 samples per batch (24-32 samples per GPU for 4 GPUs) per step.
* the gradient accumulation factor gets adjusted where I feel is best, where I keep it to 1 (no gradient accumulation) for the first milestone of getting coherent speech, and then ramping it up to 2 then 4 as training further goes on, to try and smooth out the gradients.
* more effective samples per update step is technically better, but getting coherent speech as fast as possible is preferable, so prioritizing many updates until then is the goal.
* afterwards, reducing the gradient norm is the goal, increasing the amount of samples per update step.
* as I primarily use prodigyopt, I don't need to worry about the learning rate. Sure, you can lower the `d_coef` (which the trainer will adjust in lieu of the learning rate itself), but I don't feel like it effects things moreso than just adjusting the gradient accumulation factor.
With the other "hyperparameters" such as ratios for RVQ levels, tasks, etc:
*`rvq_levels_p` to `auto` is fine. The primary level is RVQ level 0, so having it majorly represented is fine.
* it might be needed to later prefer a more balanced distribution (such as `[0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 5, 6, 7]`) to get rid of any confidence issues in RVQ levels 1+, but I felt naively doing this harms the RVQ 0.
*`prompt_similar_p` can be pretty much whatever > `0.5`. I've stuck with either `0.75` or `0.825` to prioritize adhering closely-er to the prompt, but still have random prompts used to help the model interanlly "model" what a speaker should sound like. In theory.
To quickly test if a configuration works, you can run `python -m vall_e.models.ar_nar --yaml="./data/config.yaml"`; a small trainer will overfit a provided utterance.
## Finetuning
Finetuning can be done by training the full model, or using a LoRA.
Finetuning the full model is done the same way as training a model, but be sure to have the weights in the correct spot, as if you're loading them for inferencing.
For training a LoRA, add the following block to your `config.yaml`:
```
loras:
- name : "arbitrary name" # whatever you want
rank: 128 # dimensionality of the LoRA
alpha: 128 # scaling factor of the LoRA
training: True
```
And that's it. Training of the LoRA is done with the same command. Depending on the rank and alpha specified, the loss may be higher than it should, as the LoRA weights are initialized to appropriately random values. I found `rank` and `alpha` of 128 works fine.
To export your LoRA weights, run `python3 -m vall_e.export --lora --yaml="./training/config.yaml"`. You *should* be able to have the LoRA weights loaded from a training checkpoint automagically for inferencing, but export them just to be safe.
## Training Under Windows
As training under `deepspeed` and Windows is not (easily) supported, under your `config.yaml`, simply change `trainer.backend` to `local` to use the local training backend.
Creature comforts like `float16`, `amp`, and multi-GPU training *should* work under the `local` backend, but extensive testing still needs to be done to ensure it all functions.
# `train.py`
This script handles the VALL-E specific training code.
For the most part, this handles:
* feeding the model a batch from the dataloader
* performing evaluation / validation when requested
