engine/dep/include/draco/attributes/geometry_attribute.h

// Copyright 2016 The Draco Authors.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//      http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
//
#ifndef DRACO_ATTRIBUTES_GEOMETRY_ATTRIBUTE_H_
#define DRACO_ATTRIBUTES_GEOMETRY_ATTRIBUTE_H_

#include <array>
#include <limits>

#include "draco/attributes/geometry_indices.h"
#include "draco/core/data_buffer.h"
#include "draco/core/hash_utils.h"

namespace draco {

// The class provides access to a specific attribute which is stored in a
// DataBuffer, such as normals or coordinates. However, the GeometryAttribute
// class does not own the buffer and the buffer itself may store other data
// unrelated to this attribute (such as data for other attributes in which case
// we can have multiple GeometryAttributes accessing one buffer). Typically,
// all attributes for a point (or corner, face) are stored in one block, which
// is advantageous in terms of memory access. The length of the entire block is
// given by the byte_stride, the position where the attribute starts is given by
// the byte_offset, the actual number of bytes that the attribute occupies is
// given by the data_type and the number of components.
class GeometryAttribute {
 public:
  // Supported attribute types.
  enum Type {
    INVALID = -1,
    // Named attributes start here. The difference between named and generic
    // attributes is that for named attributes we know their purpose and we
    // can apply some special methods when dealing with them (e.g. during
    // encoding).
    POSITION = 0,
    NORMAL,
    COLOR,
    TEX_COORD,
    // A special id used to mark attributes that are not assigned to any known
    // predefined use case. Such attributes are often used for a shader specific
    // data.
    GENERIC,
    // Total number of different attribute types.
    // Always keep behind all named attributes.
    NAMED_ATTRIBUTES_COUNT,
  };

  GeometryAttribute();
  // Initializes and enables the attribute.
  void Init(Type attribute_type, DataBuffer *buffer, int8_t num_components,
            DataType data_type, bool normalized, int64_t byte_stride,
            int64_t byte_offset);
  bool IsValid() const { return buffer_ != nullptr; }

  // Copies data from the source attribute to the this attribute.
  // This attribute must have a valid buffer allocated otherwise the operation
  // is going to fail and return false.
  bool CopyFrom(const GeometryAttribute &src_att);

  // Function for getting a attribute value with a specific format.
  // Unsafe. Caller must ensure the accessed memory is valid.
  // T is the attribute data type.
  // att_components_t is the number of attribute components.
  template <typename T, int att_components_t>
  std::array<T, att_components_t> GetValue(
      AttributeValueIndex att_index) const {
    // Byte address of the attribute index.
    const int64_t byte_pos = byte_offset_ + byte_stride_ * att_index.value();
    std::array<T, att_components_t> out;
    buffer_->Read(byte_pos, &(out[0]), sizeof(out));
    return out;
  }

  // Function for getting a attribute value with a specific format.
  // T is the attribute data type.
  // att_components_t is the number of attribute components.
  template <typename T, int att_components_t>
  bool GetValue(AttributeValueIndex att_index,
                std::array<T, att_components_t> *out) const {
    // Byte address of the attribute index.
    const int64_t byte_pos = byte_offset_ + byte_stride_ * att_index.value();
    // Check we are not reading past end of data.
    if (byte_pos + sizeof(*out) > buffer_->data_size()) {
      return false;
    }
    buffer_->Read(byte_pos, &((*out)[0]), sizeof(*out));
    return true;
  }

  // Returns the byte position of the attribute entry in the data buffer.
  inline int64_t GetBytePos(AttributeValueIndex att_index) const {
    return byte_offset_ + byte_stride_ * att_index.value();
  }

  inline const uint8_t *GetAddress(AttributeValueIndex att_index) const {
    const int64_t byte_pos = GetBytePos(att_index);
    return buffer_->data() + byte_pos;
  }
  inline uint8_t *GetAddress(AttributeValueIndex att_index) {
    const int64_t byte_pos = GetBytePos(att_index);
    return buffer_->data() + byte_pos;
  }
  inline bool IsAddressValid(const uint8_t *address) const {
    return ((buffer_->data() + buffer_->data_size()) > address);
  }

  // Fills out_data with the raw value of the requested attribute entry.
  // out_data must be at least byte_stride_ long.
  void GetValue(AttributeValueIndex att_index, void *out_data) const {
    const int64_t byte_pos = byte_offset_ + byte_stride_ * att_index.value();
    buffer_->Read(byte_pos, out_data, byte_stride_);
  }

  // Sets a value of an attribute entry. The input value must be allocated to
  // cover all components of a single attribute entry.
  void SetAttributeValue(AttributeValueIndex entry_index, const void *value) {
    const int64_t byte_pos = entry_index.value() * byte_stride();
    buffer_->Write(byte_pos, value, byte_stride());
  }

  // DEPRECATED: Use
  //   ConvertValue(AttributeValueIndex att_id,
  //               int out_num_components,
  //               OutT *out_val);
  //
  // Function for conversion of a attribute to a specific output format.
  // OutT is the desired data type of the attribute.
  // out_att_components_t is the number of components of the output format.
  // Returns false when the conversion failed.
  template <typename OutT, int out_att_components_t>
  bool ConvertValue(AttributeValueIndex att_id, OutT *out_val) const {
    return ConvertValue(att_id, out_att_components_t, out_val);
  }

  // Function for conversion of a attribute to a specific output format.
  // |out_val| needs to be able to store |out_num_components| values.
  // OutT is the desired data type of the attribute.
  // Returns false when the conversion failed.
  template <typename OutT>
  bool ConvertValue(AttributeValueIndex att_id, int8_t out_num_components,
                    OutT *out_val) const {
    if (out_val == nullptr) {
      return false;
    }
    switch (data_type_) {
      case DT_INT8:
        return ConvertTypedValue<int8_t, OutT>(att_id, out_num_components,
                                               out_val);
      case DT_UINT8:
        return ConvertTypedValue<uint8_t, OutT>(att_id, out_num_components,
                                                out_val);
      case DT_INT16:
        return ConvertTypedValue<int16_t, OutT>(att_id, out_num_components,
                                                out_val);
      case DT_UINT16:
        return ConvertTypedValue<uint16_t, OutT>(att_id, out_num_components,
                                                 out_val);
      case DT_INT32:
        return ConvertTypedValue<int32_t, OutT>(att_id, out_num_components,
                                                out_val);
      case DT_UINT32:
        return ConvertTypedValue<uint32_t, OutT>(att_id, out_num_components,
                                                 out_val);
      case DT_INT64:
        return ConvertTypedValue<int64_t, OutT>(att_id, out_num_components,
                                                out_val);
      case DT_UINT64:
        return ConvertTypedValue<uint64_t, OutT>(att_id, out_num_components,
                                                 out_val);
      case DT_FLOAT32:
        return ConvertTypedValue<float, OutT>(att_id, out_num_components,
                                              out_val);
      case DT_FLOAT64:
        return ConvertTypedValue<double, OutT>(att_id, out_num_components,
                                               out_val);
      case DT_BOOL:
        return ConvertTypedValue<bool, OutT>(att_id, out_num_components,
                                             out_val);
      default:
        // Wrong attribute type.
        return false;
    }
  }

  // Function for conversion of a attribute to a specific output format.
  // The |out_value| must be able to store all components of a single attribute
  // entry.
  // OutT is the desired data type of the attribute.
  // Returns false when the conversion failed.
  template <typename OutT>
  bool ConvertValue(AttributeValueIndex att_index, OutT *out_value) const {
    return ConvertValue<OutT>(att_index, num_components_, out_value);
  }

  // Utility function. Returns |attribute_type| as std::string.
  static std::string TypeToString(Type attribute_type) {
    switch (attribute_type) {
      case INVALID:
        return "INVALID";
      case POSITION:
        return "POSITION";
      case NORMAL:
        return "NORMAL";
      case COLOR:
        return "COLOR";
      case TEX_COORD:
        return "TEX_COORD";
      case GENERIC:
        return "GENERIC";
      default:
        return "UNKNOWN";
    }
  }

  bool operator==(const GeometryAttribute &va) const;

  // Returns the type of the attribute indicating the nature of the attribute.
  Type attribute_type() const { return attribute_type_; }
  void set_attribute_type(Type type) { attribute_type_ = type; }
  // Returns the data type that is stored in the attribute.
  DataType data_type() const { return data_type_; }
  // Returns the number of components that are stored for each entry.
  // For position attribute this is usually three (x,y,z),
  // while texture coordinates have two components (u,v).
  int8_t num_components() const { return num_components_; }
  // Indicates whether the data type should be normalized before interpretation,
  // that is, it should be divided by the max value of the data type.
  bool normalized() const { return normalized_; }
  // The buffer storing the entire data of the attribute.
  const DataBuffer *buffer() const { return buffer_; }
  // Returns the number of bytes between two attribute entries, this is, at
  // least size of the data types times number of components.
  int64_t byte_stride() const { return byte_stride_; }
  // The offset where the attribute starts within the block of size byte_stride.
  int64_t byte_offset() const { return byte_offset_; }
  void set_byte_offset(int64_t byte_offset) { byte_offset_ = byte_offset; }
  DataBufferDescriptor buffer_descriptor() const { return buffer_descriptor_; }
  uint32_t unique_id() const { return unique_id_; }
  void set_unique_id(uint32_t id) { unique_id_ = id; }

 protected:
  // Sets a new internal storage for the attribute.
  void ResetBuffer(DataBuffer *buffer, int64_t byte_stride,
                   int64_t byte_offset);

 private:
  // Function for conversion of an attribute to a specific output format given a
  // format of the stored attribute.
  // T is the stored attribute data type.
  // OutT is the desired data type of the attribute.
  template <typename T, typename OutT>
  bool ConvertTypedValue(AttributeValueIndex att_id, int8_t out_num_components,
                         OutT *out_value) const {
    const uint8_t *src_address = GetAddress(att_id);

    // Convert all components available in both the original and output formats.
    for (int i = 0; i < std::min(num_components_, out_num_components); ++i) {
      if (!IsAddressValid(src_address)) {
        return false;
      }
      const T in_value = *reinterpret_cast<const T *>(src_address);

      // Make sure the in_value fits within the range of values that OutT
      // is able to represent. Perform the check only for integral types.
      if (std::is_integral<T>::value && std::is_integral<OutT>::value) {
        static constexpr OutT kOutMin =
            std::is_signed<T>::value ? std::numeric_limits<OutT>::lowest() : 0;
        if (in_value < kOutMin || in_value > std::numeric_limits<OutT>::max()) {
          return false;
        }
      }

      out_value[i] = static_cast<OutT>(in_value);
      // When converting integer to floating point, normalize the value if
      // necessary.
      if (std::is_integral<T>::value && std::is_floating_point<OutT>::value &&
          normalized_) {
        out_value[i] /= static_cast<OutT>(std::numeric_limits<T>::max());
      }
      // TODO(ostava): Add handling of normalized attributes when converting
      // between different integer representations. If the attribute is
      // normalized, integer values should be converted as if they represent 0-1
      // range. E.g. when we convert uint16 to uint8, the range <0, 2^16 - 1>
      // should be converted to range <0, 2^8 - 1>.
      src_address += sizeof(T);
    }
    // Fill empty data for unused output components if needed.
    for (int i = num_components_; i < out_num_components; ++i) {
      out_value[i] = static_cast<OutT>(0);
    }
    return true;
  }

  DataBuffer *buffer_;
  // The buffer descriptor is stored at the time the buffer is attached to this
  // attribute. The purpose is to detect if any changes happened to the buffer
  // since the time it was attached.
  DataBufferDescriptor buffer_descriptor_;
  int8_t num_components_;
  DataType data_type_;
  bool normalized_;
  int64_t byte_stride_;
  int64_t byte_offset_;

  Type attribute_type_;

  // Unique id of this attribute. No two attributes could have the same unique
  // id. It is used to identify each attribute, especially when there are
  // multiple attribute of the same type in a point cloud.
  uint32_t unique_id_;

  friend struct GeometryAttributeHasher;
};

// Hashing support

// Function object for using Attribute as a hash key.
struct GeometryAttributeHasher {
  size_t operator()(const GeometryAttribute &va) const {
    size_t hash = HashCombine(va.buffer_descriptor_.buffer_id,
                              va.buffer_descriptor_.buffer_update_count);
    hash = HashCombine(va.num_components_, hash);
    hash = HashCombine(static_cast<int8_t>(va.data_type_), hash);
    hash = HashCombine(static_cast<int8_t>(va.attribute_type_), hash);
    hash = HashCombine(va.byte_stride_, hash);
    return HashCombine(va.byte_offset_, hash);
  }
};

// Function object for using GeometryAttribute::Type as a hash key.
struct GeometryAttributeTypeHasher {
  size_t operator()(const GeometryAttribute::Type &at) const {
    return static_cast<size_t>(at);
  }
};

}  // namespace draco

#endif  // DRACO_ATTRIBUTES_GEOMETRY_ATTRIBUTE_H_