- Get rid of forwards(), it makes numeric_stability.py not work properly.
- Do stability auditing across layers.
- Upsample last instead of first, work in much higher dimensionality for transforms.
Move to a fully fixup residual network for the switch (no
batch norms). Fix a bunch of other small bugs. Add in a
temporary latent feed-forward from the bottom of the
switch. Fix several initialization issues.
- Just use resnet blocks for the multiplexer trunk of the generator
- Every block initializes itself, rather than everything at the end
- Cleans up some messy parts of the architecture, including unnecessary
kernel sizes and places where BN is not used properly.
An evolution of SwitchedResidualGenerator, this variant nests attention
modules upon themselves to extend the representative capacity of the
model significantly.
Got rid of the converged multiplexer bases but kept the configurable architecture. The
new multiplexers look a lot like the old one.
Took some queues from the transformer architecture: translate image to a higher filter-space
and stay there for the duration of the models computation. Also perform convs after each
switch to allow the model to anneal issues that arise.
Found out that batch norm is causing the switches to init really poorly -
not using a significant number of transforms. Might be a great time to
re-consider using the attention norm, but for now just re-enable it.
- Add filters_mid spec which allows a expansion->squeeze for the transformation layers.
- Add scale and bias AFTER the switch
- Remove identity transform (models were converging on this)
- Move attention image generation and temperature setting into new function which gets called every step with a save path
The concept here is to use switching to split the generator into two functions:
interpretation and transformation. Transformation is done at the pixel level by
relatively simple conv layers, while interpretation is computed at various levels
by far more complicated conv stacks. The two are merged using the switching
mechanism.
This architecture is far less computationally intensive that RRDB.
- Add LowDimRRDB; essentially a "normal RRDB" but the RDB blocks process at a low dimension using PixelShuffle
- Add switching wrappers around it
- Add support for switching on top of multi-headed inputs and outputs
- Moves PixelUnshuffle to arch_util
Renames AttentiveRRDB to SwitchedRRDB. Moves SwitchedConv to
an external repo (neonbjb/switchedconv). Switchs RDB blocks instead
of conv blocks. Works good!
- Makes skip connections between the generator and discriminator more
extensible by adding additional configuration options for them and supporting
1 and 0 skips.
- Places the temp/ directory with sample images from the training process appear
in the training directory instead of the codes/ directory.
This network is just a fixed (pre-trained) generator
that performs a corruption transformation that the
generator-in-training is expected to undo alongside
SR.
It now injects noise directly into the input filters, rather than a
pure noise filter. The pure noise filter was producing really
poor results (and I'm honestly not quite sure why).
Implements a ResGenv2 architecture which slightly increases the complexity
of the final output layer but causes it to be shared across all skip outputs.
It's been a tough day figuring out WTH is going on with my discriminators.
It appears the raw FixUp discriminator can get into an "defective" state where
they stop trying to learn and just predict as close to "0" D_fake and D_real as
possible. In this state they provide no feedback to the generator and never
recover. Adding batch norm back in seems to fix this so it must be some sort
of parameterization error.. Should look into fixing this in the future.
This is a simpler resnet-based generator which performs mutations
on an input interspersed with interpolate-upsampling. It is a two
part generator:
1) A component that "fixes" LQ images with a long string of resnet
blocks. This component is intended to remove compression artifacts
and other noise from a LQ image.
2) A component that can double the image size. The idea is that this
component be trained so that it can work at most reasonable
resolutions, such that it can be repeatedly applied to itself to
perform multiple upsamples.
The motivation here is to simplify what is being done inside of RRDB.
I don't believe the complexity inside of that network is justified.
Add RRDBNetXL, which performs processing at multiple image sizes.
Add DiscResnet_passthrough, which allows passthrough of image at different sizes for discrimination.
Adjust the rest of the repo to allow generators that return more than just a single image.
After doing some thinking and reading on the subject, it occurred to me that
I was treating the generator like a discriminator by focusing the network
complexity at the feature levels. It makes far more sense to process each conv
level equally for the generator, hence the FlatProcessorNet in this commit. This
network borrows some of the residual pass-through logic from RRDB which makes
the gradient path exceptionally short for pretty much all model parameters and
can be trained in O1 optimization mode without overflows again.
The receptive field of the original was *really* low. This new one has a
receptive field of 36x36px patches. It also has some gradient issues
that need to be worked out
This bad boy is for a workflow where you train a model on disjoint image sets to
downsample a "good" set of images like a "bad" set of images looks. You then
use that downsampler to generate a training set of paired images for supersampling.
